Installing
drip irrigation is one of the effective ways to water your crops and plants,
especially if you don't have much time to do it or live in an area where rain
isn't plentiful. But with this watering method, there's room for plenty of
mistakes you can make along the way that can cost you time and money and even
damage your plants, especially if you're a beginner. Knowing the common
mistakes people make when installing a drip irrigation system can help you make
informed decisions and make the most of your drip irrigation
supplies Perth.
·
Improperly Sized Emitters
Using
emitters that are the wrong size for your crops/plants is a common mistake. If
your emitters are too small, your plants will not get enough water and
eventually die. On the other hand, if the emitters are too large, you'll end up
wasting water and money. To avoid this mistake, do your research when looking
for drip irrigation
supplies Perth and choose the right size
emitter for your plants.
·
Hooking Up Too Many Drippers to One Timer
You
might be tempted to hook up as many drippers as possible to one-timer to save
money, but this can lead to several problems. If one of the drippers becomes
clogged, the entire system will shut down, and the water pressure will drop
significantly as the water has to travel through more tubing and drippers. This
can cause your plants to suffer from a lack of water. Besides, troubleshooting
problems can be very difficult when there are so many components in one system.
·
Not Offsetting the Inline Valve from the First Fixture
One
of the most common drip irrigation mistakes is not offsetting the inline valve
from the first fixture. This can cause water pressure issues and may even
damage your system. To avoid this, offset the valve by at least 2 feet from the
first fixture.
·
Incorrectly Installing Valves and Wiring Connections
Incorrectly
installing valves and wiring connections can damage the entire system. This can
cause your system to malfunction and not work properly. Make sure you read the
instructions carefully and follow them step-by-step. If you're not sure about
something, ask a professional for help.
·
Flooding Stems or Nozzles with the Water Pressure
Regulator
Setting
the water pressure regulator too close to the nozzle or stem can result in
flooding. This can cause the water to back up and flood the stems or nozzles,
damaging your plants. Ensure the regulator is at least a few inches from the
nozzle or stem.
·
Installing a Poor Location for the Controller
Ideally,
the controller should be installed near a water source and in an area that is
protected from the elements. If the controller is installed in an area that is
too hot or cold, it can damage the electronics. Additionally, if the controller
is installed in an area that is exposed to direct sunlight, it can overheat and
malfunction.
·
Not Considering Plant Capacity When Selecting Rotors and
Spray Heads
When
looking for drip irrigation
supplies such as rotors and spray heads, it’s crucial
to consider the plant capacity. Failing to do so can lead to an inefficient
system that doesn't provide adequate coverage for your plants. Consider the
size and spacing of your plants when choosing your irrigation components.
Try to avoid these mistakes when installing drip irrigation for your garden or crop to make the most of your system. Whether you’re looking for farm fencing or Perth irrigation supplies, we got you covered. Please contact our team to help select the right drip irrigation supplies.




